New CGA

World-class quality fountain solution concentrate designed for most type lithographic printing presses to run without the need for IPA or printing alcohol.

Brand: Nikken

Type: Water Dampening System

Benefit:

For Dampening Unit

You can buy this product on:

Got questions ? Please contact:

+6221 4786 6077 Whatsapp Chat

Description

New CGA Fountain Solution (Nikken)
Nikken NEW CGA Fountain Solution is a world-class quality fountain solution concentrate designed for most type lithographic printing presses to run without the need for IPA or printing alcohol. Carefully selected ingredients employed in NEW CGA Fountain Solution will allow the pressman to control the quality of printing with a high level of on-press stability and consistency allowing to either dramatically reduce or completely eliminate the use of alcohol. Works great with UV, LED, H-UV and conventional oil-based inks.

Features and User Benefit

One-Step Solution to print without alcohol.
Faster Start-ups and Cleaner Re-starts - less paper waste.
Prevents ink from bleeding and over-emulsification - Fast ink drying on paper.
No excessive ink piling or building-up on dampening rollers, blanket and back-cylinder.
Powerfully buffered - Reduces pH drift.
Wide Operational Latitude and High On-press Stabilities.
For all types of inks and dampening systems.

Packaging:

20ltr/gallon

Usage

How to use

Prepare a diluted solution with 2% to 6% concentration in the recirculation tank.
Mix thoroughly, set the recirculation tank temperature at 10 °C – 12 °C.
When automatic volume dosing device is in use, set at 3% to start.

For Best Result

Distilled or purified water is recommended for bet result.
Nikken fountain solution incorporates a good amount of anti-foam agent. However, foaming may still occur due to running dampening solution either at high temperature or with contamination in recirculation tank.
It is recommended that recirculation tank be clean, chilled, and maintained properly around 10°C -12°C.
Both of ink and water setting with Nikken Fountain Solution will differ from those which you had with your previous fountain solutions. Start run with lower ink coverage (thinner ink film) and reduced dampening if necessary.
Fountain concentration (dosage) greater than specified may decrease ink density or cause over-emulsification. If ink over-emulsification occurs, reduce the dosage.
To prevent ink feedback or build-up on the metering rollers, we strongly recommend that dampening rollers be properly cleaned and maintained with a fine quality cleaner such as Nikken MOIST CLEAN HF (or Nikken AQUA CONTROL) and Nikken CHROME ROLLER CLEAN and DESENSITIZER.
To prevent ink roller stripping, use a water-miscible cleaner such as Nikken BLAN WASH and decalcify rollers occasionally with deglazer and conditioner such as Nikken GLAZE BUSTER (or Nikken ROLLER AID).